stillsunrise.blogg.se - Hyperterminal private edition 6

#Hyperterminal private edition 6 serial#
#Hyperterminal private edition 6 upgrade#
#Hyperterminal private edition 6 full#
#Hyperterminal private edition 6 software#

Make sure that the Backspace key sends field is set to Ctrl+H.

Make sure that the Function, arrow, and ctrl keys act as field is set to Terminal Keys.

In HyperTerminal, click File, click Properties, and select the Settings tab.

If no COM port is available and you do not have a Dell system, you will need to contact technical support for your client system.Īfter you have selected an available COM port, the COM port properties window is displayed.Ĭonsole redirection supports 9600, 19.2K, 57.6K, or 115.2K bps.Īfter you configure the ports, configure the terminal settings by performing the following steps:

From the Connect to pull-down menu, select a COM port available on your client.

Enter any name for the new connection and select any icon.

Click Start, point to Programs > Accessories > Communications, and click.

Software, see the help file for that software. If you are using other terminal emulation HyperTerminal Private Edition 6.1 or later. NOTE: The examples in this document assume that you have upgraded to Hilgraeve's

#Hyperterminal private edition 6 full#

ANSI can display the full set of ASCII characters. If you select VT100/220 but not all the characters are visible on the screen, you should go back to the System Setup program and select ANSI as your terminal type. The options available are listed in Table D-1.

The submenu allows you to turn the feature on or off, select the remote terminal type, and enable or disable redirection after booting. The Console Redirection option displays a screen that allows you to configure console redirection.

#Hyperterminal private edition 6 upgrade#

Dell recommends that you either upgrade your version of HyperTerminal to HyperTerminal Private Edition 6.1 or later or select new terminal emulation software.Ĭonsole redirection is configured through the System Setup program (see " Using the System Setup Program" for instructions). However, the version of HyperTerminal included with most Windows operating systems does not provide the correct screen size, the arrow and function keys do not work, and there is no method of creating macros. Recommended: the ability to create keyboard command macrosĪll versions of the Microsoft® Windows® operating systems come with HyperTerminal terminal emulation software.American National Standards Institute (ANSI) or VT100/220 terminal emulation with a window size of 80 x 25 characters.

#Hyperterminal private edition 6 software#

Your remote terminal emulation software should meet the following specifications:

A null modem cable to connect the server to the client system.

#Hyperterminal private edition 6 serial#

Available serial port (COM) on the serverįor systems with two available serial ports, you can use either the COM 1 or COM 2 port.

This port must not conflict with any other ports on the system.

An available serial port (COM port) on a client system.

To use console redirection, you must have the following: This section describes the simplest connection possible: connecting to a system with a null modem cable. After you use a modem or other remote connection to log into the port concentrator, you can select which system you want to manage with console redirection. In a typical installation, the system is connected to a port concen-trator that allows you to connect several systems using a shared modem. Console redirection can be used under DOS for tasks such as setting up a common BIOS configuration or setting up a RAID configuration.

Minimum Hardware and Connection RequirementsĬonfiguring Console Redirection on the Server SystemĬonfiguring Console Redirection on the Client SystemĬonsole redirection allows you to maintain a server from a remote location by re-directing keyboard input and text output through the serial port. Using Console Redirection : Dell PowerEdge 6600 Systems